2 -Read Switch and Display on LED Revision as of 21:20, 8 January 2015 by mitchell (Talk | contribs) (diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Read Switch and Display on LED

digital 2 is declared as the input port to read the values from the switch.
digital 13 is the output LED for our board in this experiment

wait 0.1 is the delay timing

Our experiment can be resume as :

when Button is clicked forever  when (if)  digital 2  send the value 1 to the digital 13 ,

it receives it and ON the LED for 0.1 sec then OFF when it is released

hence digital 13 receives 0 for 0.1 sec
and it will keep repeating until stop is clicked